Table of Contents
Advertisement
When switching on for the first time, the frequency 87.5 MHz is set.
If you have already set or saved a station, the radio will play the last station
set.
The station name appears for RDS stations.
Align the aerial to improve reception.
12.2 FM reception with RDS information
RDS is a procedure for transmitting additional information about FM stations.
Broadcasters with RDS transmit their station name or programme type, for
example. This is shown on the display.
>
The device can receive RDS information:
RT (radio text),
PS (station name),
PTY (programme type)
represent.
12.3 Set the transmission frequency manually
>
Press the ▲ or ▼ button several times to set the desired transmission
frequency. The display shows the frequency in steps of 0.05 MHz.
12.4 Automatic search
Press SCAN to start the automatic station search. The transmission
>
frequency will flash upwards on the display.
or
>
Press and hold the ▲ or ▼ button for approx. 2 seconds to automatically
search for the next station with a sufficient signal.
If an FM station with a sufficiently strong signal is found, the search
stops and the station is played. If an RDS station is received, the station
name and, if applicable, the radio text will appear.
To set weaker stations, please use the manual station selection.
In the menu > Search settings, you can set whether the search function
only finds strong stations (only strong stations). To do this, press the MENU
button
> Search settings > [Yes]. Confirm the selection with OK. If [NO] is
selected, the channel scan stops for every channel. However, these can also
be disturbed.
24
Advertisement
Table of Contents
