Align Antenna; Connecting The Power Supply Unit - TechniSat DIGITRADIO 574 IR Operating Instructions Manual

Table of Contents

Advertisement

6.2 Align antenna

The number and quality of the stations to be received depends on the reception
conditions at the installation site. Excellent reception can be achieved with the telescopic
aerial.
Release the telescopic aerial (22) from its holder, straighten it and pull it
>
out lengthways.
Note:
-
The exact alignment of the antenna is important, especially in the
peripheral areas of DAB+ reception. On the Internet, for example, you can
find
"www.dabplus.de" to quickly find the location of the nearest transmitter mast.
-
Start the first search at a window in the direction of the transmitter
mast. If the weather is poor, DAB+ reception may only be possible to
a limited extent.
-
Do not touch the aerial while a station is playing.
This can lead to impaired reception and sound dropouts.

6.3 Connecting the power supply unit

WARNING!
Do not touch the mains plug with wet hands, risk of electric shock.
Blow!
ATTENTION!
Lay the mains cable so that nobody can trip over it.
Notes:
-
Make sure that the operating voltage matches the local mains
voltage before inserting the mains plug into the wall socket.
-
Use a suitable, easily accessible mains connection and avoid using
multiple sockets!
-
In the event of faults or smoke and odours coming from the housing, pull
the mains plug out of the socket immediately!
-
If the appliance is not to be used for a longer period of time, e.g. before
travelling, unplug the mains plug.
>
Connect the DC plug of the power supply unit to the socket labelled
DC-IN (21) on the back of the DIGITRADIO 574 IR.
>
Insert the mains plug into a mains socket.
14

Advertisement

Table of Contents
loading

Table of Contents