Eliminate Errors - TechniSat DIGITRADIO 574 IR Operating Instructions Manual

Table of Contents

Advertisement

19 Eliminate errors

If the device does not work as intended, check it using the following table.
Symptom
Device cannot be switched on.
No sound can be heard.
The display does not switch on.
Reception via DAB+/FM is poor.
Device cannot be operated.
No WLAN connection possible
Device switches off automatically.
Poor Bluetooth connection and
dropouts
If you a r e still unable to rectify the fault after the checks described, please contact the
technical hotline.
36
Possible cause/remedy
The device is not supplied with power.
Connect the mains cable/power supply unit
correctly to the socket.
Increase the volume.
Disconnect the appliance from the mains
and reapply power.
Change the position of the antenna or the
DIGITRADIO 574 IR.
Disconnect the appliance from the mains
and reapply power.
Restart the WLAN wizard and check that the
password has been entered correctly.
Depending on the playback mode, the
device automatically switches to standby
mode if there is no playback, the volume
has been turned down and no operation has
taken place for 15 minutes. The auto standby
function may be active.
Do not exceed the maximum range of 10m via
Bluetooth.

Advertisement

Table of Contents
loading

Table of Contents