Saving Dab+ Stations; Selecting The Programmed Stations; Deleting A Programme Position Memory; Signal Strength - TechniSat DIGITRADIO 574 IR Operating Instructions Manual

Table of Contents

Advertisement

11.5 Saving DAB+ stations

The favourites memory can store up to 20 stations.
The saved transmitters are retained even after a power failure.
>
Play the desired station.
Press one of the number buttons 0 ... 10 on the remote control and hold it
>
down until [Saved] appears on the display.
>
Saving additional transmitters: Repeat the process.
Alternatively and for memory locations 11 ... 20:
Press and hold the PRESET button (4+ on the device), use the ▲/▼
>
buttons to select a favourite memory location 1...20 and press the OK
button.

11.6 Selecting the programmed stations

Briefly press the desired number key 0 ... 10 briefly. If you have not saved a
>
station in the selected programme position, [empty] appears. An asterisk in
the status bar indicates an active favourite station.
Alternative:
Briefly press the PRESET button (4+ on the device), use the buttons to select
>
▲/▼ to select a favourite memory location 1...20 and press the OK button.

11.7 Deleting a programme position memory

>
Save the new channel to the relevant programme position.

11.8 Signal strength

Press the INFO button several times. The signal strength is displayed.
>
>
The level bar shows the current level.
Transmitters whose level is below the required minimum signal strength do
not transmit a sufficient signal. If necessary, align the antenna as described
under point 6.2.
22
Minimum signal strength
Signal strength

Advertisement

Table of Contents
loading

Table of Contents