Snooze Function; Charging Function For External Devices; System Settings; Equaliser - TechniSat DIGITRADIO 574 IR Operating Instructions Manual

Table of Contents

Advertisement

15.2.4

Snooze function

With the alarm clock active, press the SNOOZE button (1) to activate the
>
snooze function. The alarm is muted and restarts after the set snooze time.
The snooze time can be increased by pressing the SNOOZE button several
times (5, 10, 15...minutes).

16 Charging function for external devices

The DIGITRADIO 574 IR has a wired charging function for external devices such as
mobile phones or smartphones.
>
Use the original charging cable (USB) of your external device and insert the
USB plug into the USB port (20) on the back of the DIGITRADIO 574 IR.
The external device can be charged with a maximum of 5 V and 1 A.

17 System settings

All settings explained in this section apply equally to all sources.
>
Open the menu and use the ▲ / ▼ buttons to select
[System settings]. Press the OK button to open the system
settings.

17.2 Equaliser

Press the MENU button and then select
>
[System settings] > [Equaliser].
Alternatively: Press the EQ button (19) on the remote control.
Here you can make various equaliser settings to adjust the sound to your liking. You
have the choice between:
Normal, jazz, rock, classical, pop.
Use the ▲/▼ buttons to select an equaliser setting and press the OK button
>
to accept the setting.

17.3 Audio stream quality

Depending on the internet speed, the audio stream quality of the internet
radio stations can be adjusted (if available). The higher the quality, the higher
the data transmission.
Press the MENU button and then select
>
[System settings] > [Audio stream quality].
Select a quality level and press the OK button to save.
>
29

Advertisement

Table of Contents
loading

Table of Contents