Dynamic Label Plus; Set Drc; Delete Inactive Stations; Adjust Channel Order - TechniSat DIGITRADIO 574 IR Operating Instructions Manual

Pressing the INFO button several times switches through various
information, e.g. programme type, multiplex name, frequency, signal error
rate, data bit rate, programme format, date.

11.9 Dynamic Label Plus

If supported by the programme provider, the Dynamic Label Plus service allows, for
example, the name of the current programme or the title and artist to be displayed
additionally.

11.10 Set DRC

The compression rate compensates for dynamic fluctuations and the associated volume
variations.
Press the MENU button and select [Volume adjustment] to select the desired
>
compression rate.
> Use the ▲/▼ buttons to select the compression rate:
DRC high
DRC low
DRC off
Confirm by pressing OK.
>

11.11 Delete inactive stations

Press the MENU button and use ▲ or ▼ to select [Delete inactive
>
channels].
Confirm by pressing OK.
>
Select with ▲ or ▼ > [Yes] and confirm by pressing OK.
>

11.12 Adjust channel order

Press the MENU button and then press ▲ or ▼ > [Channel
>
order].
> Select a sorting type with ▲ or ▼ and confirm your selection with
OK.
You have the choice between: Alphanumeric or Provider.

12 FM radio

12.1 Switch on FM radio mode

Press the MODE button until [FM radio] appears in the display. Alternatively:
>
Press the MENU button and then select [Main menu > FM].
>
- High compression
- Low compression
- Compression switched off.
23