Fm Reception With Rds Information; Automatic Station Scan - TechniSat DIGITRADIO UP 55 Instruction Manual

In the case of RDS stations, the station name appears.
If reception interference occurs, check the antenna or note the instructions for
improving reception in the FAQ section.

10.2 FM reception with RDS information

RDS is a procedure for broadcasting additional information via FM stations. Broadcasters
with RDS broadcast their station name or the programme type, for example. This is
shown on the display. The device can show the RDS information RT (Radio text), PS
(Station name), PTY (Programme type).

10.3 Automatic station scan

> Hold down the << or >> buttons for a bit longer (2 to 3 sec.) to automatically
search for the next station with a sufficient signal.
If an FM station with sufficient signal intensity is found, the scan stops and the
station is played. If an RDS station is being received, the station name appears
and, possibly, radio text.
Please use the manual station scan for setting weaker stations.
92