Installation Information; Installation Company Information - Pyronix Enforcer X Series User Manual

INSTALLATION INFORMATION

INSTALLATION COMPANY INFORMATION

Alarm Company
Date of Installation
Site Reference
Engineer Name
Installation Company Contact Number
Installed to Grade
Environmental Class
This control panel is suitable for use in installations designed to meet the European requirements of Security Grade 3, and Environmental Class II. When all parts are
working normally, this equipment in combination IP communication meet the requirements of ATS5.
This control panel meets all the following standards and certifications:
STANDARD
EN 62368-1:2014 + A1 1:2017
EN 61000-6-3: 2007 + A1: 201 1
EN 50131-1: 2006 + A3: 2020
EN 50131-3: 2009
EN 50131-6: 2017 +A1:2021
EN 50131-5-3: 2017
EN 50130-5: 201 1
EN 50130-4: 201 1 + A1: 2014
ETSI EN 301 489-1 V2.2.3
(2019-1 1)
ETSI EN 301 489-3 V2. 1 . 1
(2019-03)
ETSI EN 300 220-2 V3. 1 . 1
(2017-02)
ETSI EN 300 330 V2. 1 . 1 (2017-02)
PD 6662: 2017
2014/53/EU
Directive (EU) 2017/2102 amending
201 1/65/EU AND 2015/863/EU
External arm/disarm readers and wireless sirens meet the requirements of environmental class 4.
Number of Code Differs: Tag hex code.
Your panel is designed to automatically inhibit certain functionality.
Keypad
After 30 key presses without entering a valid code, keys are disabled for 90 seconds. After reinstatement, this will be repeated after each 7 key presses until a valid
code is entered.
Proximity tag reader (or reader at a keypad)
After 6 presentations of an invalid tag, the reader will be disabled for 90s. After reinstatement, this will be repeated for each invalid tag until a valid tag is used.
Pyronix Ltd, Secure House, Braithwell Way, Hellaby, Rotherham, S66 8QY
DESCRIPTION
Audio/video, information and communication technology equipment -Safety requirements
Electromagnetic compatibility (EMC) Generic standards. Emission standard for residential, commercial and light-
industrial environments
Alarm systems. Intrusion and hold-up systems- System requirements
Alarm systems. Intrusion and hold-up systems. Control and indicating equipment
Alarm systems. Intrusion and hold-up systems. Power supplies
Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnections equipment using radio frequency
techniques
Alarm systems - Part 5: Environmental test methods
Alarm systems Electromagnetic compatibility. Product family standard: Immunity requirements for components of fire,
intruder, hold up, CCTV, access control and social alarm systems
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical
requirements; Harmonised Standard for ElectroMagnetic Compatibility
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for
Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard covering
the essential requirements of article 3. 1 (b) of Directive 2014/53/EU
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard
covering the essential requirements of article 3.2 of Directive 2014/53/EU for non-specific radio equipment.
Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems
in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of
Directive 2014/53/EU [for the prox reader at 125kHz].
Scheme for the application of European Standards for intrusion and hold-up alarm systems
Radio Equipment Directive (RED)
EU RoHS restriction of the use of certain hazardous substances in electrical and electronic equipment
ENFORCER X USER GUIDE
II
27