Table of Contents
Advertisement
FAULT INDICATIONS & UNABLE TO ARM
FAULT INDICATIONS
Control panel
Any faults that occur on the system will be easily recognised by the
flashing ALERT LED.
To see what the fault is, enter a valid PIN code, or present a valid
tag, or press on the keyfob.
Depending on how the system has been programmed by your
installation company, it may be possible to arm the system with a
fault, to do this press f.
Please note: Any fault may affect the overall performance of your alarm control panel and therefore your
installation company should be contacted for further assistance if any fault is active.
UNABLE TO ARM
Control panel indication
If 'unable to arm' is displayed, it indicates that a zone is open and
the area where the zone is should be checked for open windows,
pets, movement etc.
If the problem cannot be solved contact your installation company,
or omit the zone.
12
ENFORCER X USER GUIDE
Alarm Panel
Time
10:09 c
Control Panel
Battery Fault
Unable To Arm
Zone 001
Advertisement
Table of Contents
Need help?
Do you have a question about the Enforcer X Series and is the answer not in the manual?
Questions and answers