Disarming After An Alarm; Using A Pin Code Or Proximity Tag 1; Using The Wireless Keyfob 1 - Pyronix Enforcer X Series User Manual

DISARMING AFTER AN ALARM

USING A PIN CODE OR PROXIMITY TAG
Enter a valid PIN code or present a valid tag to the symbol as
shown.
The alarm or tamper symbol will flash indicating there has been an
activation and the keypad will display which zone has activated.
Press h to reset the system.
Please note: If the keypad displays 'Restore required', please
contact the installation company.
USING THE WIRELESS KEYFOB
To disarm via a keyfob. Press .
The keyfob LED will start to flash green indicating that the system has disarmed.
Rearming the system after an alarm can only be done at the keypad.
Please note: Disarming with a keyfob will only be allowed if your
installation company has enabled this.
ENFORCER X USER GUIDE
Enter Your Code
[******]
Alarm Silenced
Alarm Panel
Time 10:09 c
<2 seconds
1 1