Entering Master Manager Mode; Exiting Master Manager Mode; Master Manager Mode Options; Omit Zones - Pyronix Enforcer X Series User Manual

ENTERING MASTER MANAGER MODE

Press d.
Enter the Master Manager code or present the Master Manager
tag.
Press b or h to scroll through the different functions.

EXITING MASTER MANAGER MODE

Press b or h keys to scroll through until 'EXIT MANAGER
MODE?' is displayed.
Press f.
Or, when a main menu item is displayed (capital letters) press a.

MASTER MANAGER MODE OPTIONS

OMIT ZONES

OMIT ZONES?
Press b or h to scroll to 'OMIT ZONES?'.
Press f
Enter the zones you require to be omitted for the next arming
procedure.
Press f.
Press h to return to the main menu.
Please note: This option will not omit any PA and/or fire zones.

OPERATE USER OUTPUTS

OPERATE USER OUTPUTS?
This option toggles outputs that are programmed as 'User Outputs'.
Use the numerical keys or scroll using [ or ] until reaching the
user output to trigger. Pressing f toggles between on and off.
ENFORCER X USER GUIDE
Enter Your Code
[ ]
EXIT MANAGER
MODE?
OMIT ZONES?
Omit Zone[---]
Select Output
[01]
15