Arming A Single Area System At A Keypad - Pyronix Enforcer X Series User Manual

Once the area to be armed is on the display, use a, b, c
or d to select the level. Once selected, press f.
Example referral
If Area 02 level B was selected, the following zones will arm:
• Zones 16-18
If Area 03 level D was selected, the following zones will arm:
• Zones 34-36
The keypad will now display 'Arm Another Area?'. Press f to
arm another area or h to start the exit timer.
The keypad will now display the exit timer, leave the building via the
agreed exit route and make sure the exit door is closed properly.

ARMING A SINGLE AREA SYSTEM AT A KEYPAD

Enter a valid PIN code or present a valid tag to the symbol.
Using a, b, c or d, enter the level that is to be armed
then press f.
The keypad will now display the exit timer, leave the building via the
agreed exit route and make sure the exit door is closed properly.
ENFORCER X USER GUIDE
Arm [02] [*B**]
Level B
Arm [03] [***D]
Level D
Arm Another
Area?
Arming [028]
Area 02
Enter Your Code
[******]
Arm [01] [A***]
Level A
Arming [028]
Area 01
7