Basic Controls; Connecting To The Panel; Biometric Authorisation - Pyronix Enforcer X Series User Manual

BASIC CONTROLS

Connecting to the panel

1. Select the intruder system from the main screen of HomeControl2.0 that you wish to connect to.
2. Enter your 'User code' and 'App password'.
3. To save the user code and app password, toggle the sliders so that they are green and then tap 'Login'.
4. HomeControl2.0 is now connected to the system.
Please note: Whilst you are connected to the panel via HomeControl2.0, you will not receive notifications. To
disconnect, press < in the top left corner of the system controls screen.

Biometric authorisation

The next time the system is selected from the main screen, HomeControl2.0 will ask whether
the user would like to enable facial or fingerprint recognition; depending on the smart device
capabilities.
In order to connect to panels via biometric authorisation, the user code must be saved using the
slider when connecting to the panel.
24
ENFORCER X USER GUIDE