Date & Time; Learn User Codes Keyfobs & Tags - Pyronix Enforcer X Series User Manual

DATE & TIME
DATE & TIME?
All log entries are date and time stamped. This can also programmed in the Master Manager Mode. The time is also
shown on the LCD in 'Day Mode' .
Please note: Powering down the system will reset the time and date information unless communications are
configured and the system reconnects to the data path on power up.
Timezone
Choose the timezone by scrolling through with b and d or enter the number of the city if known.
For example: [205] London, [018] Athens, [217] Madrid, and [268] Oslo.
Change year
For the year 2022, enter 22.
Change month
For March, enter 03.
Change day
For 31st, enter 31.
Change hours
Use 24 hour clock format. For 8pm enter 20:00.
Change minutes
For 7:30, enter 30.
Time Prompt
If set to '[1] Yes' the panel will prompt the user to manually update the time if the panel loses the current time; such as in the
event of a power outage followed by depletion of the back up battery.
LEARN USER CODES KEYFOBS & TAGS
LEARN USER CODES KEYFOBS & TAGS?
The 'LEARN USER CODES KEYFOBS & TAGS?' function allows adding, editing and deleting of both master manager
and user codes, tags and keyfobs.
The control panel can have up to 500 users programmed. Each of the users are allocated a code, tag or a wireless
keyfob.
Please note: A maximum of 32 users can have a wireless keyfob allocated with the addition of a wireless ZEM to
the system.
16
Add New User?
Delete/Change User?
Change Master Manager Code?
ENFORCER X USER GUIDE