Mitsubishi Electric FR-D720 K Series Instruction Manual page 27

Main circuit terminal specifications
Three-phase 400V class
FR-D740-0.4K to 3.7K
Jumper
N/- P/+
R/L1 S/L2 T/L3
PR
Power supply
FR-D740-11K, 15K
N/- P/+ PR R/L1 S/L2 T/L3
Jumper
Power supply
Single-phase 200V class
FR-D720S-0.1K to 0.75K
N/-
R/L1 S/L2
Power supply
Single-phase 100V class
FR-D710W-0.1K to 0.4K
N/-
R/L1 S/L2
Power supply
NOTE
 Make sure the power cables are connected to the R/L1, S/L2, and T/L3. (Phase need not be matched.) Never connect
the power cable to the U, V, and W of the inverter. Doing so will damage the inverter.
 Connect the motor to U, V, and W. Turning ON the forward rotation switch (signal) at this time rotates the motor
counterclockwise when viewed from the load shaft.
16
IM
Motor
IM
Motor
Jumper
P/+ PR
IM
Motor
P/+ PR
IM
Motor
FR-D740-5.5K, 7.5K
Jumper
R/L1 S/L2 T/L3
N/- P/+ PR
Power supply
FR-D720S-1.5K, 2.2K
Jumper
N/- P/+
R/L1 S/L2
PR
Power supply
FR-D710W-0.75K
N/- P/+
R/L1 S/L2
PR
Power supply
IM
Motor
IM
Motor
IM
Motor