Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for Beckhoff CP37 Series
Summary of Contents for Beckhoff CP37 Series
- Page 1 Manual | EN CP37xx Panel PC 2023-10-16 | Version: 2.0...
-
Page 3: Table Of Contents
Grounding the Panel PC .................... 26 4.3.2 Connecting cables and power supply ................ 28 Switching the Panel PC on and off.................... 30 5 Beckhoff Device Manager ........................ 32 6 Decommissioning ........................... 34 Disconnecting the power supply and cables ................... 34 Disassembly and disposal....................... 35 7 Maintenance ............................ 36... - Page 4 Table of contents Version: 2.0 CP37xx...
-
Page 5: Notes On The Documentation
Copyright © Beckhoff Automation GmbH & Co. KG. Publication of this document on websites other than ours is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. -
Page 6: For Your Safety
Exclusion of liability Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the devices outside the documented operating conditions. -
Page 7: Fundamental Safety Instructions
For your safety Fundamental safety instructions The following safety instructions must be observed when handling the the Panel PC. Application conditions • Do not use the device under extreme environmental conditions. • Only use the device in hazardous areas if it is explicitly designed for this purpose. •... -
Page 8: Notes On Information Security
For your safety Notes on information security The products of Beckhoff Automation GmbH & Co. KG (Beckhoff), insofar as they can be accessed online, are equipped with security functions that support the secure operation of plants, systems, machines and networks. Despite the security functions, the creation, implementation and constant updating of a holistic security concept for the operation are necessary to protect the respective plant, system, machine and networks against cyber threats. -
Page 9: Product Overview
Product overview Product overview With the CP37xx series you can use multi-touch directly in the field. The devices in the robust aluminum housing are designed for mounting arm installation. The connection cables are routed through the mounting arm. Thanks to its processors, you can use the panel PC for the following applications, among others: •... -
Page 10: Structure
Product overview Structure Figure 1 shows the device configuration as an example of all CP37xx versions. Fig. 1: Structure Table 1: CP37xx configuration legend Component Description Display and touch screen glass Operation of the panel PC Mounting arm tube Mounting arm tube for installation from below or above Locking screw Anti-twist protection of the mounting arm adapter... -
Page 11: Interface Description
Product overview Interface description In the basic configuration, the panel PC includes the following interfaces: • Power supply (X102) • Ethernet RJ45 (X101) The interfaces are located at the rear of the panel PC in the connection compartment. With a mounting arm adapter installed on the panel PC, you must first gain access to the connection compartment of the device. -
Page 12: Power Supply
(0 V) and 6 (24 V). If the panel PC is equipped with an integrated uninterruptible power supply (UPS), an external battery can additionally be connected to PIN 1 and PIN 2. The two Beckhoff options C9900-U330 and C9900-U332 are available for this purpose. -
Page 13: Ethernet Rj45
Product overview 3.2.2 Ethernet RJ45 The basic version of the panel PC has an Ethernet RJ45 interface (X101) in the form of a push-pull built-in socket. The 100Base-T and 1000Base-T Ethernet standards enable the connection of corresponding network components and data rates of 100/1000 Mbit/s. The required speed is selected automatically. The cable is routed through the mounting arm adapter. -
Page 14: Optional Interfaces
Product overview Optional interfaces You can expand the panel PC beyond the basic configuration with additional interfaces in the connection compartment. The following ordering options are available: • Ethernet RJ45 (order identifier: C9900-B416) • Ethernet RJ45 (order identifier: C9900-E185) • RS232 (order identifier: C9900-E186) •... -
Page 15: Rs232
Product overview 3.3.2 RS232 The optional RS232 interface includes an M12 socket according to IP65. The interface provides an asynchronous, serial communication method defined in the RS232 standard. Fig. 6: RS232 interface pin numbering Table 6: RS232 pin assignment Signal Type Description Carrier recognized Signal in Receive Data... -
Page 16: Rs485
Product overview Table 8: RS422 standard configuration Function State Echo Auto send Always send Auto receive Always receive Termination 3.3.4 RS485 The optional RS485 serial interface includes an electrically isolated M12 IP65 socket for high-speed serial data transmission. The channel features overvoltage protection. If an overvoltage occurs, the channel is switched off. 11 12 Fig. 8: RS485 interface pin numbering Table 9: RS485 pin assignment... -
Page 17: Fig. 9 Usb Interface Pin Numbering
Product overview Table 11: Ordering options for USB interfaces Options Description C9900-E279 1-port USB 3.0 socket with screw cap IP65 in the side panel C9900-E281 1-port USB 2.0 socket with IP65 screw cap in the side panel of the PC housing C9900-E283 IP65 connector in connection compartment for one USB 3.0 port, push-pull USB 3.0 socket... -
Page 18: Name Plate
Product overview Name plate The name plate provides information about the equipment of your panel PC. The name plate shown here serves only as an example. 10 11 12 xxxxxxxx xxxxxxxxxxxx xxxxxxxxxxxx Fig. 10: Name plate Table 13: Legend for CP37xx name plate Description Storage media Main memory... -
Page 19: Connecting Cable
Product overview Connecting cable Optionally, ready-made connecting cables for all connections are available in various lengths. You can order them using the following article descriptions: Table 14: Power supply cable Connecting cable Power supply cable with IP65 plug C9900-K364 Power supply cable IP65 for CP32xx, CP37xx or CP72xx up to 19-inch display, length 2 m, pre-assembled, M23 socket, screwable, 8-wire, second end open C9900-K271 Power supply cable IP65 for CP32xx, CP37xx or CP72xx, length 5 m, pre-... -
Page 20: Accessories
Serial interface cable RS232 for CP32xx, CP37xx or CP72xx, length 10 m, pre- assembled, M12 connector IP65, screwable, 12-pin, second end D-sub 9 connector Accessories You can order your panel PC with accessories already mounted ex factory. The following Beckhoff options are available: Table 18: Accessory options CP37xx... -
Page 21: Commissioning
You can either order a Beckhoff protective film individually and fit it yourself retrospectively, or you can order the film for fitting directly ex factory. Please refer to the price list for the available protective films according to the display size of your device. - Page 22 5. Check the contents for visible shipping damage. 6. In case of discrepancies between the package contents and the order, or in case of transport damage, please inform Beckhoff Service (see Chapter 10.1 Service and Support [} 44]). Version: 2.0 CP37xx...
-
Page 23: Mounting
• Do not expose the panel PC to direct sunlight. Regardless of which of the two Beckhoff mounting arm adapters you have chosen, the procedure for installing the mounting arm tube is the same. Depending on whether you have oriented the mounting arm adapter upwards or downwards, the mounting arm tube has to be installed on the adapter in the same direction. -
Page 24: Fig. 13 Mounting Arm Tube Installation
Commissioning Among other tools you need a hook wrench for the installation. You can order this from your Beckhoff Sales using the following order identifier: • C9900-Z263: hook wrench size 58-62 for tying up the slotted nut of the C9900-M75x mounting arm adapter Figure 13 shows an example of the procedure with the standard mounting arm adapter facing upwards. - Page 25 Commissioning CP37xx Version: 2.0...
-
Page 26: Connecting The Panel Pc
Commissioning Connecting the Panel PC CAUTION Risk of electric shock Dangerous touch voltages can lead to electric shock. To avoid electric shock, observe the following: • Never connect or disconnect the device cables during a thunderstorm. • Provide protective earthing for handling the device. To make the panel PC ready for operation, you have to connect it. -
Page 27: Fig. 14 Grounding Bolt For Functional Earthing
Commissioning The functional earth is necessary for the EMC of the device. The functional earth is established via the connection of the grounding bolt in the connection section of the panel PC (see Fig. 14). Use cables with a minimum cross-section of 4 mm for the ground connection. -
Page 28: Connecting Cables And Power Supply
If you ordered your device with an integrated UPS, then you can connect an external battery pack and install it on a DIN rail near to the PC. Use only Beckhoff battery packs for this: • C9900-U330: universal battery pack for PCs and panel PCs in any configuration •... -
Page 29: Fig. 15 Battery Pack C9900-U330 Wiring Diagram
Commissioning ext. Switch ext. switch 24 V DC PC_ON Power status Industrial PC power connector 24 V DC Lmax = 10 m 1,5 mm 24 V/3, 4 Ah 30 V/9 A C9900-U330 battery pack Fig. 15: Battery pack C9900-U330 wiring diagram For more information on the battery pack, please refer to the corresponding manual. -
Page 30: Switching The Panel Pc On And Off
When you switch on the PC for the first time, the optionally pre-installed operating system will be started. For any additional hardware you have connected, you have to install the drivers yourself afterwards. In addition, the Beckhoff Device Manager starts automatically. The Device Manager is a software from Beckhoff that supports you in configuring the PC. - Page 31 You then use the installation package to install the UPS software components. The UPS software components come with a detailed help function. Call up the help files either directly from the configuration register by clicking the Help button or start the file under Start > Programs > Beckhoff > UPS software components.
-
Page 32: Beckhoff Device Manager
• User name: Administrator • Password: 1 You also have the option of using the Beckhoff Device Manager to remotely configure the industrial PC via a web browser. More detailed information is available in the Beckhoff Device Manager manual. First start Beckhoff Device Manager When your industrial PC is booted for the first time, the Beckhoff Device Manager also starts automatically for the first time. -
Page 33: Fig. 17 Beckhoff Device Manager - Start Page
Secure passwords Strong passwords are an important prerequisite for a secure system. Beckhoff supplies the device images with standard user names and standard passwords for the operating system. It is imperative that you change these. Controllers are shipped without a password in the UEFI/BIOS setup. Beckhoff recommends assigning a password here as well. -
Page 34: Decommissioning
Decommissioning Decommissioning NOTICE Hardware damage due to power supply A connected power supply can cause damage to the Panel PC during disassembly. • Disconnect the power supply from the device before starting to disassemble it. As part of the decommissioning of the Panel PC, you must first disconnect the power supply and cables. Afterwards, you can dismount the device from the mounting arm. -
Page 35: Disassembly And Disposal
Decommissioning Disassembly and disposal To be able to dismount the panel PC from the mounting arm, you must first have disconnected the power supply and the cables (see Chapter 6.1 Disconnecting the power supply and cables [} 34]). Removing the mounting arm tube NOTICE Damage to property due to falling down If the panel PC is suspended from the ceiling and you undo the cap nut of the mounting arm adapter... -
Page 36: Maintenance
You can clean the front screen of the panel PC during operation. In order to avoid inadvertent touch entries when doing this, you must first set the device to "Cleaning Mode" with the help of the Beckhoff Control Tool. The Beckhoff Control Tool does not start automatically when the panel PC starts up. Proceed as follows to activate the "Cleaning Mode"... -
Page 37: Fig. 19 Selection "Cleaning Mode
Maintenance Fig. 19: Selection "Cleaning Mode" You can set the duration for which the panel PC should remain in "Cleaning Mode". The period can be set between 5 and 120 seconds. Right-click the sun symbol again and click "Options". Now select the appropriate period (see fig. -
Page 38: Table 19 Replacement Recommendations For Pc Components
NOTICE Use of incorrect spare parts The use of spare parts not ordered from Beckhoff Service can lead to unsafe and faulty operation. • Only use spare parts that you have ordered from Beckhoff Service. Beckhoff Panel PCs are manufactured from components of the highest quality and robustness. They are selected and tested for best interoperability, long-term availability and reliable function under the specified environmental conditions. -
Page 39: Replacing The Battery
Replace the battery with R/C (BBCV2), order number CR2032, nominal voltage 3 V. Using any other battery may cause fire or explosion. • Only replace the battery with a replacement battery from Beckhoff Service. • When replacing the battery, make sure that the polarity is correct. -
Page 40: Fig. 22 Replacing The Battery
Maintenance NOTICE Battery damage Incorrect handling of the motherboard battery can damage it. • Do not recharge the battery. • Do not throw the battery on the fire. • Do not open the battery. • Protect the battery against direct sunlight and moisture. NOTICE Motherboard failure Scratches on the motherboard may cause the motherboard to fail. -
Page 41: Replacing The Storage Media
If you want to exchange a storage medium according to Beckhoff's recommendation, you must copy the data from the old to the new storage medium. You can use the Beckhoff Service Tool (BST) for this purpose. BST is a graphical backup and restore program for PCs with a Windows operating system. You can create an image of your operating system and use it to back up the operating system. -
Page 42: Troubleshooting
No power supply to the Panel PC Check the power supply cable Cable not connected 1. Correctly connect the cable 2. Call Beckhoff Service Panel PC boots, software starts, The cause of the error is the Call the machine or software... -
Page 43: Technical Data
CP3721: 9.1 kg CP3724: 10.1 kg Supply voltage 22-30 V (24 V power supply unit, NEC class 2) Power consumption Data sheet power consumption and power loss in the download finder: https://www.beckhoff.com/de-de/support/downloadfinder/ suchergebnis/?c-1=40717316 Protection rating IP65 Vibration resistance (sinusoidal EN 60068-2-6: 10 ... 58 Hz: 0.035 mm vibration) 58 ... -
Page 44: 10 Appendix
33415 Verl Germany Phone: + 49 5246/963-0 email: info@beckhoff.de The addresses of the worldwide Beckhoff branches and agencies can be found on our website at http:// www.beckhoff.com/. You will also find further documentation for Beckhoff components there. Version: 2.0 CP37xx... -
Page 45: 10.2 Approvals
Appendix 10.2 Approvals Your device has the following approvals: • CE • EAC • UKCA • FCC You will find all other applicable approvals on the name plate of your device. FCC approvals for the United States of America FCC: Federal Communications Commission Radio Frequency Interference Statement This device was tested and complies with the limits for a digital device of class A, according part 15 of the FCC regulations. - Page 46 Grounding bolt for functional earthing ..................Fig. 15 Battery pack C9900-U330 wiring diagram ................... Fig. 16 Beckhoff Device Manager - Change passwords ................Fig. 17 Beckhoff Device Manager – Start page ..................Fig. 18 Removing the mounting arm tube ....................
- Page 47 List of tables List of tables Table 1 CP37xx configuration legend ....................... Table 2 Wiring with 8-core cable....................... Table 3 Wiring with 12-core cable (C9900-K275/-K276/-K277) ..............Table 4 Ethernet interface pin assignment....................Table 5 Ethernet interface pin assignment....................Table 6 RS232 pin assignment ......................... Table 7 RS422 pin assignment .........................
- Page 49 More Information: www.beckhoff.com/cp37xx Beckhoff Automation GmbH & Co. KG Hülshorstweg 20 33415 Verl Germany Phone: +49 5246 9630 info@beckhoff.com www.beckhoff.com...