Showven SPARKULAR Cyclone BT61 User Manual page 6

Interface
Δ
1. Main Interface:
First Line: shows DMX address
Second Line: shows inner temp. and temp. bar, as well as error info if available. Displays
remaining time is 7 minutes and 24 seconds.
2. Error information
Error information
E0 System IC
E2 Temp. Sensor
E3 P Temp. Over
E4 Time Remain
E5 K Temp. Over
E6 Heat Fail
3. Setting Menu
Press "MENU" switch through setup menu.
Options Range
Set DMX Address 1-512
Fountain Height 1-10
Manual Heat ON/OFF
Manual Fountain ON/OFF
Auto Clear Delay 0.1-0.9s
4. Advanced Menu
Press "MENU" 3 seconds to enter the advanced setup interface, press MENU key to enter
different options, wait 3 seconds to return to the main interface.
Options
Set Temperature
Wireless Control
LCD Backlight
Systematic error
Temperature sensor is not connected or damage
Chassis over-temperature
Activated time for machine is not enough, please swiping RFID card
Heating chamber over-temperature
Heating Fail, if it recovery automatically, problem is shortage of
power supply
Default
Set DMX address. Each machine occupy two DMX
1 channels. If controlled by Host Controller, please
assign a unique address for each machine
5 Manual firing height setup, for test only
ON Auto preheat function switch after turn on machine
ON Manual firing, for test only
0.2s Auto clear material time after each firing
Range Default
580-620 580
ON/OFF OFF
ON/OFF ON
Explanation
Explanation
Explanation
Default is 580. Please don't change default value
without engineer's suggestion from
®
SHOWVEN .
n.a.
LCD screen backlight ON/OFF