Analog Out 5-10; Mixer - Arturia AUDIOFUSE 16RIG User Manual

• The third page has a drop-down menu that lets you select what the front-panel
OUTPUT jack will transmit. Options are:
7.2.4. ANALOG OUT 5–10
Clicking on any other channel number accesses the two ANALOG OUT pages, both of which
have output metering:
• The first page has a Gain knob and a Stereo Link button
• The second page has an indicator showing which signal is being sent to that
channel's OUT jack.

7.3. MIXER

Clicking on the MIXER icon, or pressing the front panel MIXER button, takes you to the MAIN
MIXER page.
Each channel in the mix has its own indicators for level, mute, and solo. There are also
meters for the Aux sends and L/R Main mix. Analog channels come first, then ADAT
channels, then USB channels.
If there are more channels in the mix than there is room on the screen, scrolling to the right
will move you to the next screen and more channels.
Arturia - User Manual AudioFuse 16Rig - Menus and Functions
Line: A conventional line-level output.
◦
Reamp: Sends the chosen source out through the front-panel output
◦
at the appropriate level and impedance to feed a pedalboard or
amplifier for reamplification.
DirectThru: Creates a true zero-latency connection from the front-
◦
panel INPUT jacks 1 and 2 to the OUTPUT jacks 3 and 4. This is
important if you want to record a clean guitar signal to your computer
while also playing through your pedals and amp; this connection taps
into your cable run without introducing latency that can affect your
playing.
AltPhones: Converts each output on the front panel into its own stereo
◦
headphone jack. These outputs must share the same source (i.e., they
must mirror each other and you can not have separate things playing
from output 3 and 4), and their output level is set using the Gain knob
on page 1. However, the AltPhones do not have to mirror the main
headphone outputs of AudioFuse 16 Rig. You can set their source in
the Routing Matrix.
35