As Slave; Sync In/Out Types - Arturia KEYSTEP 37 User Manual

6.2. As Slave

KeyStep 37 functions as a slave to an external clock when one of those options is selected
on the rear panel (USB, MIDI or Sync In).
When KeyStep 37 is in Slave mode:
• The Tempo controls will not control the internal sequencer or arpeggiator while
the external source is running.
• The KeyStep 37 transport section will still perform as usual; you can still stop,
start and pause the internal sequences and the arpeggiator, and you can still
record sequences.
• KeyStep 37 will pass the synchronization messages it receives from the external
source to all three clock outputs, and will convert all clock types to MIDI clock for
the MIDI and USB outputs.

6.2.1. Sync In/Out types

The MIDI Control Center can be used to configure the KeyStep 37 to send and receive one
of the following types of clock signals at the Sync input and output connectors:
• 1 step (Gate)
• 1 step (Clock)
• 1 pulse (Korg)
• 24 pulses per quarter note (ppqn)
• 48 ppqn
The default rate is 1 step (Clock).
Arturia - User Manual KeyStep 37 - Synchronization 62