Overview Screen; Analog Inputs - Arturia AUDIOFUSE 16RIG User Manual

8.3. Overview Screen

Clicking the first of the Screen Selector icons opens an overview of the AudioFuse 16Rig's
inputs and outputs, with level meters and various controls.

8.3.1. Analog Inputs

The upper left section of the Overview screen contains meters and controls for the Analog
Inputs. These duplicate the features of the hardware, but allow for all inputs to be seen at
once. Each input has a level meter, stereo Link button shared with the adjacent input, gain
control, and buttons for Pad and Phase.
In addition, the first four inputs can be switched to the Rear jacks on the hardware. This
lets you leave cables plugged into the Input 1 and 2 XLR/TRS jacks and the Input 3 and 4
minijack while sending other signals to their corresponding rear-panel inputs. Remember, if
the Rear button is not pressed, the corresponding rear inputs will be ignored.
Inputs 1 and 2 will also display a 48V button for phantom power if an XLR cable is plugged
into the front panel, or an INST button for high-impedance instrument-level signals if a 1/4"
cable is plugged into the front panel.

Note that some of these function buttons (48V and INST, for example) will only appear if appropriate
front-panel connections are made. If the appropriate cable is not connected to the front panel, the
button(s) will not be shown.
52 Arturia - User Manual AudioFuse 16Rig - AudioFuse Control Center