Main Mixer Screen; Adding Channels - Arturia AUDIOFUSE 16RIG User Manual

8.4. Main Mixer Screen

This screen brings up AudioFuse 16Rig's Main mixer, and provides functions that let you build
and set it far more quickly and easily than with the user interface of the AudioFuse 16Rig
itself.
When you open this screen for the first time, it will look like this:
The Factory preset populates the Main mixer with a set of eight analog input channels as
shown here.
The controls for the MAIN section are present on the right. They include:
AUX 1–4: These are controls for the four Aux buses. Each has a level meter at left,
•
level control, and M (Mute) and PRE (Pre-fader) buttons. In addition, Aux 1 and 2
can be linked to form one stereo bus, and Aux 3 and 4 can do the same.
+/– Channels: Click here to add channels to the mix, as described below.
•
• The Master output level meters and fader are here. Numerical displays above the
meters show the highest level seen so far, in dBFS.

8.4.1. Adding Channels

If the starting configuration isn't precisely what you need, the Main mixer screen allows you
to build a custom mix, adding the inputs you need and leaving out the ones you don't. This
is done with the Main Channels pop-up window.
Arturia - User Manual AudioFuse 16Rig - AudioFuse Control Center 55