System Info; Presets - Arturia AUDIOFUSE 16RIG User Manual

Here you can configure AudioFuse 16Rig to suit your preferences.
Clipping Reset: This drop down sets the amount of time it takes for clipping indicators to
automatically clear. This is a global setting that affects all meters in the hardware and also
AFCC. Options include 1.5 seconds, 3 seconds, or Infinite.

Note: If you set the Clipping Reset time to "Infinite" the clip indicators will not clear automatically. In
this case you will need to clear the meters manually by clicking and holding the encoder for 3 seconds.
Orange Color Threshold: This drop down sets the point at which the VU meter color changes
from green to orange. This is a global setting that affects all meters in both the hardware
and also in AFCC.

7.6.4. SYSTEM INFO

This "About" screen lists some of your interface's operational details, such as:
• MIDI Firmware Version
• Audio Firmware Version
• Serial Number
• Hardware Revision

7.7. PRESETS

One of the fun things you can do with the AudioFuse 16Rig is to use it in standalone mode,
with no computer attached to it. It's a very handy mixer with lots of routing flexibility, and it
doesn't need a host program to be useful in that regard.
However, it does require a place to save all of its routing and mix settings when the
computer is not connected. That's one of the many uses for Presets.
Presets can also be very useful even when the AudioFuse 16Rig isn't in standalone mode; if
you have different workflows for recording music, doing voiceovers, reamping instruments,
and so forth, you can speed up your work by saving each configuration as a Preset.
Arturia - User Manual AudioFuse 16Rig - Menus and Functions 43