Table of Contents
Advertisement
4.2. The Rear Panel
The AudioFuse 16Rig's rear panel has a large complement of connectors. Here's a guide,
moving from right to left .
4.2.1. Line Inputs 1–16
At the far right, you'll find 16 TRS balanced analog inputs with world-class A/D converters.
These can handle signal levels up to +24 dBu with the Pad switched on, and +12 dBu with
the Pad switched off.
Remember that the rear Inputs 1 & 2 are ignored if the front panel inputs are used, unless
the REAR function is selected. Inputs 3 & 4 work the same way.
4.2.2. Line Outputs 3–10 and Speaker Outputs
To the left of the Line Inputs are 8 balanced analog line-level outputs. Any of these four pairs
of outputs can be sent to another set of speakers and controlled from the front panel if A/B
Speaker mode is engaged.
These outputs are all DC coupled. That means they are capable of not only playing audio, but
running DC control voltages to external modular synthesizers and other analog synth gear. This lets you
control your analog synths from your DAW with the right software!
Arturia - User Manual AudioFuse 16Rig - Getting to Know the AudioFuse 16RIG
The AudioFuse 16Rig rear panel
Rear panel audio inputs
Rear panel audio outputs, with Speaker
outputs at left
15
Advertisement
Table of Contents
