Using Keylab With Analog Lab; Audio & Midi Setup; Audio Setup - Arturia Keylab Series User Manual

3 USING KEYLAB WITH ANALOG LAB

The information in this chapter will focus mostly on the KeyLab keyboard and how it
interacts with the Analog Lab software. As a result this chapter will touch only briefly on
the various Analog Lab parameters that the KeyLab controls. For more details about
Analog Lab, please refer to the Analog Lab user manual.
3.1 Audio & MIDI Setup
The first thing to do after launching Analog Lab is to make sure the software is set to
output Audio correctly and that it will receive MIDI from the KeyLab keyboard.

3.1.1 Audio setup

In order to check the audio driver settings for Analog Lab, open the Preferences window
by pressing [Command] + [,] or by selecting it from the Analog Lab drop-down menu.
The Preferences menu item for Mac OS X... ...and for Windows
This will open the Audio & MIDI Settings window, which is where the preferred audio
output device will be selected. Now click the Test button: If you hear a short sine wave,
then your audio is set up correctly. If not, make sure the correct audio driver is selected
and that your headphones or speakers are properly connected and turned on.
ARTURIA – KeyLab – USER'S MANUAL 19