Using Two Sets Of Speakers - Arturia AUDIOFUSE 16RIG User Manual

This method lets you adjust a mix on any or all channels from the front panel of the
AudioFuse 16Rig without a computer, and up to eight Main mixes can be saved and loaded
as Presets.

As you can imagine, this process can get pretty tedious. It's much faster and easier to set up and
save Main and Cue mixes using the
the various Aux and Mix outputs can only be set within AFCC.

5.6. Using Two Sets of Speakers

It's quite common for studios to have two sets of monitor speakers set up at any given time.
In addition to the main set of monitors, a second set can be used as "check speakers" to
hear what the mix sounds like on, say, a car stereo or cheap home entertainment system.
Alternatively, a studio might have a very loud and bass-heavy PA set up to impress clients.
Whatever use you might have for a second set of speakers, AudioFuse 16Rig can easily
accommodate your needs.
1. Connect your primary speakers to the rear panel Monitor Outs.
2. Select any pair of rear panel outputs to feed your second set of speakers.
3. Press the OUTPUTS button, select MON, and click to enter the Monitor Settings
pages. Scroll to the third page, labeled A/B Conf.
4. Here you can activate or deactivate A/B switching as a function using the button
with the power symbol. The A/B button switches between the Monitor outs (unlit)
and the B Speaker outs (lit). The drop-down menu lets you choose which pair of
rear panel outputs will feed the B Speakers.
5. If you wish to make A/B switching a one-button affair, you can set up the front-
panel Monitor button to do this. To do this, enter the Settings section from the
carousel, and go to the Monitor Settings page. There, set the Monitor Button Mode
to "A/B Speaker".
22
AudioFuse Control Center [p.8]
Arturia - User Manual AudioFuse 16Rig - Putting Your AudioFuse 16Rig To Work
software. Also, channel routings for