Midi Config - Arturia AUDIOFUSE 16RIG User Manual

This page has a set of MIDI activity indicators, that light up when MIDI signals are received
from the appropriate inputs or sent to the corresponding outputs.
INPUT sources include:
DIN1: the rear panel 5-pin DIN MIDI IN
•
USB HOST: the front panel USB port labeled MIDI
•
USB DEVICE: MIDI messages coming from your music software and/or
•
computer (via USB)
OUTPUT sources include:
DIN1 and DIN2: the two rear panel 5-pin DIN MIDI OUT/THRU
•
SYNC: the rear panel CLOCK OUT minijack
•
USB HOST: the front panel USB port labeled MIDI
•
USB DEVICE: MIDI messages going to your music software and/or computer (via
•
USB)

7.5.2. MIDI CONFIG

The MODE control is a drop-down menu that lets you set how the AudioFuse 16Rig responds
to MIDI.
STANDALONE: The AudioFuse 16Rig passes MIDI from sources to destinations
•
without the need for a computer. These routings are set in the STANDALONE MIDI
page described below.
HOSTED: The interface connects the attached MIDI gear to a host computer. The
•
music software on the host computer can then decide where the MIDI signals
are routed.
AudioFuse 16Rig's Main mixer is MIDI controllable. The MIXER CONTROL drop-down
determines which MIDI inputs port will provide MIDI control messages to the AudioFuse
16Rig's mixer. This lets you quickly manipulate mixes using a control surface rather than
using the front panel controls or the AFCC software.
Choices include: NONE, DIN, USB HOST, USB DEVICE
Arturia - User Manual AudioFuse 16Rig - Menus and Functions 39