Monitor And Phones - Arturia AUDIOFUSE 16RIG User Manual

Next to these buttons is the color LCD that displays all relevant information while using the
AudioFuse 16Rig.
To the right is the main encoder for parameter control, which can be turned or pressed
(clicked). A small Back button next to it moves you back up the hierarchy of screen menus
when needed.

4.1.5. Monitor and Phones

Next is the Monitor knob, which controls the level coming out of the rear-panel Speaker outs.
It's accompanied by a MUTE button that when clicked, turns red and silences the speakers.
Below the MUTE button is a programmable function button. It lights in a different color for
each function, and blinks when activated. The functions are:
Mono (green): sums the left and right signals being sent to the speaker outputs.
1.
This is useful if you need to verify mono compatibility or to check for phase-
related issues in your mix.
Dim (orange): turns down the speaker output by an amount designated in
2.
the AudioFuse Control Center software. This is useful if you need to have a
conversation in the studio without stopping playback or losing your reference
loudness level while mixing.
A/B Speaker (blue): mutes the Speaker outputs and turns on a pair of B Speaker
3.
outputs designated by the user – any analog output pair on the rear panel can be
designated for B Speaker use. However, we recommend using 5-6, 7-8 or 9-10,
and leaving 3-4 available since outputs 3-4 are mirrored on the front panel and
provide other useful functionalities.
Arturia - User Manual AudioFuse 16Rig - Getting to Know the AudioFuse 16RIG
The display, encoder, and Back button
Monitor and Phones controls and front-
panel USB ports
13