Access Point Mode; Vlan Setup - Cerio OW-400 A1 User Manual

4.

Access Point mode

4.1

VLAN Setup

Here are the instructions to setup the local IP Address / Netmask / Gateway / DNS and management
Access Point 2.4G or 5G Radio on/off. Administrators can change settings such as LAN Spanning Tree
and Tag VLAN functions.
VLAN Mode：Display on/off for the VLAN network.

Flag：Display master VLAN and VLAN Tag No. information.

IP Address：Display IP Address for VLAN Network.

NetMask：Display IP netmask.

Radio 0：Display radio 2.4G SSID name.

Radio 1：Display radio 5G SSID name.

When AP mode is chosen, the system can be configured as an
Access Point. This section provides detailed explanation for users
to configure in the AP mode with help of illustrations. In the AP
mode, functions listed in the table below are also available from
the Web-based GUI interface.
V4.0