Cerio OW-400 A1 User Manual page 79

MAC Address: Display Radio 1(5G) used MAC address.

Country: Administrator can select country used channel by US / EU and Taiwan.

Band Mode: If Client Bridge want to use 5G link to Access Point then administrator can enable

the function (Radio 1(5G).
Auto Channel: Administrator can Enable or Disable the function. If select disable function the

WiFi channel can be fixed a channel.
Channel: Support US / EU / Taiwan country by 5G Channel.

Tx Power: Administrator can control the WiFi Tx output power. The power Max. Level 9.

Slot Timout : You can enter the slot time value here. When the distance is long or short, the

waiting time for packet transmission will be adjusted fast and slow.
Distance: When the "Distance" button is clicked, the point-to-point bridge distance can be

entered. The system will automatically calculate the ideal reference value for the Slot Time
and ACK Timeout. The input distance is calculated in units (meters).
ACK Timout : When waiting for the "ACKnowledgment frame" interval is too long to be

received,the ACK will be retransmitted. A higher ACK Timeout will reduce packet loss, but the
transmission efficiency will be poor.
Setting Slot Time and ACK Timeout can strengthen the long-distance
connection. Changing the value can optimize the setting. If the value is too
low, the length transmission will be reduced. If the value is too high, there may
be disconnection.
HT Physical Mode
TX/RX Stream: supporting 2TX/2RX streams. Administrator can select 1 or 2 TX/RX. The

default is 2TX/2RX.
V4.0