Cerio OW-400 A1 User Manual page 66

VLAN：The function can select VLAN (please refer to "Configure VLAN Setup") for

managed APs.
VLAN Mode：Administrator can enable or disable VLAN mode of the managed APs.

Access Point0/1：Administrator can enable or disable 2.4G or 5G radio of the

managed APs. (Access Point 0 is radio 2.4G, Access Point 1 is radio 5G)
802.1d Spanning Tree：Administrator can enable or disable the function.( please

refer to "Configure Network  802.1d Spanning Tree")
Control Port：The function administrator can enable or disable of the managed

APs (please refer to "Configure Network  Control Port")
IAPP：The function administrator can enable or disable of the managed APs

(Please refer to "Configure Network  IAPP")
IP Setup：Administrator can set IP address and Netmask of the managed APs.

ETH0/1 VLAN Tag Setup：Administrator can set VLAN Tag or disable VLAN function

V4.0