Radio 1 Setup(5G) - Cerio OW-400 A1 User Manual

This product has a built-in 2x2 (2T2R) antenna for 2.4Ghz, which has been
matched with the default setting of 2T2R. If there is no special demand, please
keep this default setting .
Extension Channel: Sets channel select to Upper or Lower. The Upper supports 1 to 7 range

CH and Lower supports 5 to 11 range CH.
MCS:
This parameter represents transmission rate. By default (Auto) the fastest possible

transmission rate will be selected. You have the option of selecting the speed if necessary.
Shout GI: Short Guard Interval is "Enabled" by default to increase throughput. However, it can

also increase error rate in some installations, due to increased sensitivity to radio-frequency
reflections. Select the option that works best for your installation.
Aggregation: By default, it's "Enabled". Select "Disable" to deactivate Aggregation.

A part of the 802.11n standard (or draft-standard), it allows sending multiple frames per single
access to the medium by combining frames together into one larger frame. It creates the
larger frame by combining smaller frames with the same physical source and destination end
points and traffic class (i.e. QoS) into one large frame with a common MAC header.

4.5.2 Radio 1 Setup(5G)

MAC Address: Display 5G WiFi MAC address.

Country: Administrator can select country: US or EU or Taiwan.

Band Mode: Administrator can select 5G Band for 802.11a/n or 802.11ac. The default is 802.11ac

Auto Channel: Administrator can Enable or Disable the function. If select disabled function the

WiFi channel can be manually fixed.
Channel: Supports US and EU country 5G Channel standards.

Tx Power: Administrator can control the WiFi Tx output power. The power Max. Level 9.

Slot Timout : You can enter the slot time value here. When the distance is long or short, the

waiting time for packet transmission will be adjusted fast and slow.
Distance: When the "Distance" button is clicked, the point-to-point bridge distance can be entered.
V4.0