Repeater Ap Setup - Cerio OW-400 A1 User Manual

6.4.6

Repeater AP Setup

Administrators can configure ESSID, SSID broadcasting, Maximum number of client associations.
1. If want to use Repeater AP function then Clinet Bridge must determine
connection to Access Point then Repeater AP can operate normally.
2. The default is enabling of Repeater AP. If want to used pure Client Bridge will
can disable it.
3. When Client Bridge used 2.4G to connection station then Repeater AP
function only used the other 5G Wi-Fi. Same practice If Client Bridge used
Radio 1(5G) then Repeater AP only used Radio 0 (2.4G) Wi-Fi.
Access Point: Administrator can Enable or Disable the Repeater AP function.

ESSID: Enter the Repeater AP of ESSID name.

SSID Visibility: The default it's Enable. When select Disable the SSID will not is discovered.

Client Isolation: This function is Disabled by default. All clients will be isolated from each other,

which mean they can't reach each other.
Connection Limit: This function is Disabled by default. If select Enable, Administrator can limit

Wi-Fi users the Quantity.
Authentication: Select the desired security type from the drop-down list; the options are

WPA-PSK, WPA2-PSK, WPA/WPA2-Enterprise and WEP 802.1X.
V4.0