Cerio OW-400 A1 User Manual page 117

Mobility Domain: MDID is used to indicate a group of APs (within an ESS, i.e., sharing the

same SSID) between which a STA can use Fast BSS Transition.
Please enter 2-octet identifier as a hex string.
R0 Key Lifetime: Default lifetime of the PMK-RO in minutes, the default is 10000,

administrator can setting 1~65535.
Reassoc deadline: Reassociation deadline in time units (TUs / 1.024 ms; range 1000~65535).

The default is 1000.
R0/NAS Identifier: PMK-R0 Key Holder identifier. When using IEEE 802.11r, nas_identifier

must be set and must be between 1 and 48 octets long.
R1 Identifier: PMK-R1 Key Holder identifier 6-octet identifier as a hex string.

R1 Push: Administrator can select Enable or disable. If enable the function will automatically

sent the R1 Key.
R0 Key Address:
To enable roaming between multiple AP devices, AP1 must key in the MAC Address of AP2, and AP2
must key in the MAC Address of AP1. The NAS Identifier and 128-bit Key should be identical in both
AP settings. This will enable device roaming between the two Access Points.
MAC Address: Enter must key in the MAC Address of other AP

NAS Identifier: Enter 1~48 octets of network domain name.

Shared Key of 128 bit.
128-bit Key: Enter

R0 Key Holder List:
After setting "R0 Key holders" function the information will appear in list.
R1 Key Holder List:
V4.0