Dhcp Server - Cerio OW-400 A1 User Manual

4.1.1

DHCP Server

Administrator can select enable / disable the function
 Start IP: Set Start IP address for DHCP Service.
 End IP: Set End IP address for DHCP Service.
 Netmask: Set IP Netmask, the default is 255.255.255.0
 Gateway: Set Gateway IP address for DHCP Service.
 DNS(1-2) IP : Set DNS IP address for DHCP Service.
WINS IP: Enter IP address of the Windows Internet Name Service (WINS) server; this is optional.

Domain: Enter the domain name for this network.

Lease Time: The IP addresses given out by the DHCP server will only be valid for the duration

specified by the lease time. Increasing the time ensure client operation without interruptions,
but could introduce potential conflicts. Lowering the lease time will avoid potential address
conflicts, but might cause more interruptions to the client while it will acquire new IP addresses
from the DHCP server. Default is 86400 seconds
DHCP Client List
Administrator can view IP address used status of client users on each DHCP Server.
V4.0