Active: Administrator can select Virtual server rule to Enable or disable.
Comment:
Enter the description of virtual server rule.
Protocol: Administrator can select service protocol of TCP or UDP.
Public Port: Enter service port No. for public.
Private IP Address: Enter corresponding IP address for internal.
Private Port: Enter internal service port No. for private.
Schedule : Administrator can select to used rule of "Time Policy"
Click "Save" button to save your set function. Then click "Reboot" button to activate your
changes.
7.6.5
Access Control
The Access Control function administrator can to block or allow specific kinds of TCP/UDP/ICMP
protocol, such as Internet access, designated services, and websites. The Access Control function
can set 20 profiles.
Please click on Advance -> Access Control and follow the below setting.
#:Display access control list.
Active:Display Active or InActive for the access control rule.
V4.0