Cerio OW-400 A1 User Manual page 32

R0/NAS Identifier: PMK-R0 Key Holder identifier. When using IEEE 802.11r, nas_identifier must

be set and must be between 1 and 48 octets long.
R1 Identifier: PMK-R1 Key Holder identifier 6-octet identifier as a hex string.

R1 Push: Administrator can select Enable or disable. If enable the function will automatically

sent the R1 Key.
R0 Key Holder:
To enable roaming between multiple AP devices, AP1 must key in the MAC Address of AP2, and AP2
must key in the MAC Address of AP1. The NAS Identifier and 128-bit Key should be identical in both
AP settings. This will enable device roaming between the two Access Points.
MAC Address: Administrators must enter the MAC Address of other AP

NAS Identifier: Enter 1~48 octets of network domain name.

128-bit Key: Enter

R1 Key holders : Enter a unified set of R1 Key Holder identification certification.
MAC Address: Enter the main roaming device MAC address

R1 Identifier: Enter Shared identifier.

128-bit Key: Enter Shared Key of 128 bit.

Click "Save" button to save your changes. Then click Reboot button to activate your changes.
Shared Key of 128 bit.
V4.0