Comment: Display information for the rule.
Protocol:Display information for the protocol.
Edit:Administrator can click the button to set Access Control rule.
# Access control rules:
Active:Administrator can select Enable or Disable for the Access control rule.
Comment:Administrator can enter comment for the role.
Protocol:Administrator can to select management protocol by TCP/UDP/ICMP/Content
Filter/Application and Domain Filter.
ANY: Select "Any" is all deny Protocol, administrator can filter local IP / IP range go to
destination IP / IP range and use protocol.
TCP: Deny TCP Protocol, Administrator can set TCP protocol and assign IP / IP range.
UDP: Deny UDP Protocol, Administrator can set UDP protocol and assign IP / IP range.
ICMP: Deny ICMP Protocol, Administrator can assign IP / IP range.
Content Filter: Administrator can set web Keyword to filter.
Application: System built-in multiple applications data, Administrator can select
application data to filter.
Domain: Administrator can set domain name to filter.
Schedule:The rule can apply Time Policy.
Click "Save" button to save your set function. Then click "Reboot" button to activate your changes.
V4.0