Approved Attachments And Static Load Test - Pronomic Lift & Drive 90PRX Operator's Manual

10.3
Approved attachment and static
Attachments can be divided into groups. Below is a
table of approved attachments.
If the lift trolley/tool is modified or trolley is equipped
with other attachments a supplementary risk analysis
must be carried out according to declaration of
conformity with directive 2006/42/EC.
The trolley is marked with a maximum load sign.
The maximal load sign is clearly placed on top of the
control unit ref. to chapter 1.4 Signs. Trolleys with more
than one tool will be marked with a sign per tool.
90 130 175
PRX PRX PRX
Rated capacity (Label) Kg
Test load production (x1,25)
90 130 175
113 163 219
Platform /Fork
70 70
88 88
70 70
88 88
70 70
88 88
70 70
88 88
80 80
100 100
80 80
100 100
80 80
100 100
80 80
100 100
225 325
PRX PRX
Part no
225 352
281 406
17710
17720
17730
17740
21851
21852
21853
21854
19511
load test
The table below is valid for a trolley without tools or
a trollety with standard tools. The trolley's maximum
load is defined according to "Rated capacity (Label) Kg".
The static loadtest is made according to the "Test load
production (x1,25)".
For trolleys with customer-adapted tool ref. to chapter
10.4 Pronomic customized attachments and loadtest
customer project.
Discription
No Tool
Platform Scale, 500x450mm, 90kg
Counting Scale, 500x450
Roll-on platform, front feed
Roll-on platform, side feed
Std platform 90/130P 90/130PRX
Std platform, front roller 90/130P 90/130PRX
Std platform, L&R rollers 90/130P 90/130PRX
Std platform 3 rollers 90/130P 90/130PRX
Load platform for 175/225P 175/225PRX
41