4 Set up
The setup function tests and charging must be
performed before first use, after transportation or
when the lift trolley has been stored for more than a
month.
4.1 Unpacking and inspection
Recycle and dispose of protective packaging correctly
in a safe and environmentally friendly way.
Make sure that the delivered goods have no visible
damage.
When order the Lift&Drive trolley there is a choice
between having the trolley delivered fully or partially
assembled. In both ways it is delivered on a pallet or in
a crate
4.1.2 Orderd and deliverd as partially assembled Model 90/130PRX
3
4
1
12
2
14
×2
13
12
4.1.1 Orderd and deliverd as fully assembled
•
Remove the plastic that covers the pallet.
If using a knife, make sure to not scratch or
damage any part of the lift trolley.
•
Cut and remove the plastic straps that hold the lift
trolley to the pallet.
•
Release the brake by moveing the brake rod to its
middle position to disengage/unlock the central
brake.
•
It is recommended to use ramps when moving the
lift trolley from the pallet. Move the trolley forward
and down from the pallet on the ramps.
•
If no ramps are available, make sure that at least 2
people move the lift trolley from the pallet. Make
sure the lift trolley has no visible damage.
6
10
15
11
8
5
9
7
×2