Raising And Lowering The Load Carrier - Pronomic Lift & Drive 90PRX Operator's Manual

5.7 Raising and lowering the load carrier

3
CAUTION
space to raise the load carrier.
CAUTION
use lower speed when approaching a
position.
WARNING:
Always wear protective shoes when oper-
ating the lift.
NOTE: Battery type VRLA AGM; when the state of charge
reaches minimum level the load carrier will not raise. This
function is to prevent damage to the batteries. The load
carrier can still be lowered.
NOTE: The battery type LiFePO4 can quickly go from 50-
0% state of charge. If this occurs and the trolley is loaded,
remove battery unit and charge it
separately.
24
: Make sure there is enough
: To avoid damage, always
Heavy load!
2
1
NOTE: The battery type LiFePO4 is equipped with a BMS
(Battery Monitoring System) to protect the battery from
damage. When voltage (over/under) or temperatures
(high/low) is out of level BMS turns the main power
supply off.
The vertical movement, both direction and speed, of
the load carrier is operated by the lever on the hand
control.
1. Engage the central brake.
2. A slight push on the lever gives low stepless speed.
A hard push on the lever gives high stepless speed.
Release the lever to stop motion.
3. When the lever is pushed upwards the load carrier
is lifted. When the lever is pushed downwards the
load carrier is lowered.