Table of Contents
Advertisement
3 Storage, disposal
and transportation.
3.1 Storage
Ensure that the trolley is stored in a dry place and
should not have any leakage or corrosive gases
entering it.
The trolley could be equipped with one of two
different battery types, LifePo4 Lithium batteries
or VRLA AGM batteries. Both battery types are
maintenance free and need charging regularly to
function properly. Aways disconnect battery from
electronics unit when storing.
When the battery are at storage, it will always slowly
lose it´s charge over time.
The self-discharge in the battery is low.
VRLA AGM batteries:
The recommended storage temperature is
20-25°C (68-77°F). The storage time must not exceed
12 months without charging. This is applicable to fully
charged batteries. Empty batteries put in storage will
degrade in months.
Temperature
20-25°C (68-77°F)
30°C (86°F)
40°C (104°F)
LiFePO4 batteries:
Store at 50-80%state of charge. The self-discharge in
the battery is very low, about 2% per month with a
temperature 0-60°C (32 to 140°F).
Temperature
0-60°C (32 to 140°F)
Maximum storage time
before charging
12 month
8 month
4 month
Maximum storage time
before charging
more than12 month
3.2 Disassembly, scrapping and disposal
Disassemble the lift trolley, refer to chapter 4.1
"Unpacking and inspection". Use the assemble instruc-
tions in reverse order
When the lift trolley is due for scrapping the machine,
complete with batteries, it should be handed in to a
recycling center or to your supplier. Follow local regu-
lations to ensure reuse and safe handling of all parts.
3.3 Transportation
If the cart is fully assembled, it must stand up during
transport/shipping. The hand control and motor cable
should be disconnected.
Make sure the lift trolley is secured properly when
shipping.
11
Advertisement
Table of Contents
