Kenwood TS-60S Instruction Manual page 53

9 MAINTENANCE AND ADJUSTMENTS
SS FT TT TT TE
ADJUSTMENTS
Removing the transceiver covers provides access to
the following variable resistors:
Top cover removed:
Sidetone volume (VR 5)
Beep volume (VR 6)
Microphone gain {only SSB or AM mode, VR 7)
Bottom cover removed:
FM modulation level (VR 1)
™@ = Removal of the Top and Bottom Covers
Remove the 7 screws as shown. Lift off the
transceiver top cover.
Remove the 9 screws as shown. Lift off the
transceiver bottom cover.
B Location of the Variable Resistors
The variable resistors are located at the positions
shown.
'
camel
MM:
| } {L.:]]]!Remove the speaker
ce bracket,|['ll
Increase ag | H
» Decrease] oa (| i lit
3 FAD
z Se.
Increase | ac |
O
=—VR7
4 Le ae
Remove the speaker.
Note:
1 Oress the speaker wires near Point <A> befare reinstalling
the speaker.
2. Be sure not to scrape or pinch any wires when reinstalling the
covers.
53