Kenwood TS-60S Instruction Manual page 30

3 COMMUNICATION
SPLIT-FREQUENCY OPERATION
If things grow aut of hand, it is the DX station's
responsibility to take control by announcing that he will
be "listening up 5 (kHz, from his present transmit
frequency)", or "listening down between 5 and 10
(kHz)".
This usually means the DX station will not
change his transmit frequency, but will begin Split
operation in order to tune among the calling stations,
pick out a callsign or two, and begin working those
stations.
Since, for the moment, the DX station is
holding his transmit frequency, you should not change
your receive frequency.
1 Assume that you are receiving a DX station on
50.615 MHz using the A VFO.
2 Press the A=B button to copy the contents of
A VFO to VFO B.
3 Press the A/B button to select VFO B.
4 Tune VFO B to the desired split transmit
frequency.
Try to choose a clear frequency free
of other stations.
30