Kenwood TS-60S Instruction Manual page 52

Prablem Symptom
Probable Cause
Corrective Action
Memory scan doesn't work.
1 Data is not stored in two or
more memory channels.
2 All memory channels are
lacked out.
3 With Group Scan selected,
the channel you want to
scan is in a different group.
2 Unlock the memory channels you
want to scan.
3 Select All-channel Scan, or program
the desired frequency within the
current group.
Scanning desired frequencies is
difficult because there are so many
memories, you can't find the
frequencies you want to scan.
Vyou have programmed the
memories randomly without
using some kind of organizing
system.
4
~ |The Automatic Power Off
function is on.
——_
Turn the APO off.
59.999.9 MHz.
TRANSMISSION
Problem Symptom
i Probable Cause
Corrective Action
=
The microphone is
connected incorrectly.
2 The antenna is connected
incorrectly.
3 You are transmitting out of
band.
4 The automatic power down
circuit is active due to high
transmitter temperature.
5 The antenna has a problem.
especially while calling CQ.
Transmissions result in no contacts,
1 The transmit frequency is
different from the receive
frequency since the RIT
function is on.
2 You are using split frequency
by mistake.
3 You are transmitting on the
wrong sideband in the SSB
mode.
awe
= 8
Press the RIT button.
Push the SPLIT button.
Push the SSB/CW button to select
the correct sideband.
52