Kenwood TS-60S Instruction Manual page 12

FRONT PANEL CONTROLS
KENWOOD
SDUN: AgL MODE TRANBCRIVER 75-60
sade
(CS) [{eemu we arr was vo G SOUT FAST SLOW F LOCK 1M
Ae a fy a a a a 7
paver fed .
$80.5.0.0. 6. Om -B Bw
— |I es repos
an pe init an Mt MSGR ORG Scan
io)
Om
Ce
© ©
*
4 a-tt.
7
@® POWER switch
® MENU button
Press to access the Menu Set-up mode.
Menu Set-up allows configuration of numerous
parameters such as RF output power, AGC, frequency
Step size, etc. Refer to "MENU SET-UP" on pages
46 and 47.
@® AIP/ATT button
Activates the AIP (Advanced Intercept Point) or ATT
{Attenuator) function, or both simultaneously. Initially,
or after a partial or full CPU reset, AIP and ATT are
off. With each press, the setting changes in
sequence.
Both off ->—-——*_ AIP
f i
Bothon
-—-——
ATT
The status displays at the LCD top left. (Nothing
displays when both functions are off.)
The MC-47 microphone allows separate ATT and AIP
selection. For PF (Programmable Function} key
information, refer to "Programmable Function Keys"
on pages 48 and 49.
@© NB button
Toggles the noise blanker.
For details, refer to "Noise Bianker" on page 43.
@® PHONES jack
Insert the headphones plug into this jack. Any
headphones with an impedance of 4 to 32 ohms,
including stereo headphones, may be used. Use a
3.5 mm mono (two conductor) or stereo (three
conductor) plug.
When using headphones, no sound will be heard from
the internal (or external} speaker.
Note: When connecting headphones, insert the plug straight
into the jack without applying sideways force thal could damage
the jack.
12