Kenwood TS-60S Instruction Manual page 21

50 mhz all mode transceiver

Hide thumbs Also See for TS-60S:

3 COMMUNICATION

Before operation, confirm that all connections and

settings are ready according to this checklist:

Rear panel:

Ground:

Is the transceiver actually grounded?

Caution:

D0 NOT transmit without an antenna connected

to the ANT connector.

The transceiver can fail. Be certain

to connect the correct cable, for the right antenna, for the

band you intend to operate.

See Rear panel checklist, step

UUUUY

een TET |

Ground using a short copper wire (3 to

Connect the DC

4mm diameter} or copper braid.

power supply

Use a PL-259 (M type) connector.

using the supplied

power cable.

Front panel:

Front panel controls:

Are they preset?

Microphone:

Is the connector fully inserted and

snugly screwed down?

AF and Squelch controls should

be fully counterclockwise,