Kenwood TS-60S Instruction Manual page 36

QUICK MEMORY CHANNEL SELECT
SELECTING A CHANNEL CONTAINING
DATA
Select from occupied memory channels while skipping
the empty channels with this procedure:
1
Press the M/V button to change from VFO to
Memory Channei mode. The last memory channel
number selected appears.
MoH
a4 - we
se re 8 ten
eC)
Press the MHz button.
appears.
The 1 MHz indicator
McH
4
aia gp a mw oe
Press the UP or DOWN button to select from the
occupied memory channels.
To return to the VFO mode, press the M/V button.
Note: if ail memories are empty (no data stored),
pressing the UP or DOWN button will cause the Morse code
"CHECK" alarm to sound.
SELECTING AN EMPTY CHANNEL
Select from the empty channels with this procedure:
1 Press the M.IN button to enter the Memory Scroll
mode. The M.SCR indicator appears. The
receiver continues to operate. Only the display
changes.
seut SLOW
dane. (15.0
S102 nee oe
a
Press the MHz button. The 1 MHz indicator
appears.
er ee
aa30.) a
{ war
pest
Pea te
Press the UP or DOWN button to switch among
the empty memory channels.
4
4 MEMORY FEATURES
Press the CLR button to exit the Memory Scroll
mode.
Note: Pressing the UP or DOWN button if all memory
channels have stored data will sound the Morse code
"CHECK" alarm.
MEMORY CHANNEL CLEAR
Clear a memory channel with this procedure:
1
Press the M/V bulton to change fram VFO to
Memory Channel mode. The last memory channel
number selected appears.
Select a memory channel using the UP or DOWN
button.
Example: Select memory channel 7, containing
50.750 MHz.
Press the CLR button for approximately twa
seconds. The displayed frequency is cleared and
the memory channel is erased.
To return to the VFO mode, press the M/V button.
36