Kenwood TS-60S Instruction Manual page 35

4 MEMORY FEATURES
MEMORY CHANNEL PROTECT
There are two ways to protect memory channels from
being cleared accidentally:
® Memory Protect 1: Write/delete inhibit
© Memory Protect 2: Overwrite/delete inhibit
MEMORY PROTECT 1
(WRITE/DELETE INHIBIT)
1 Press the MENU button to enter the Menu Set-up
mode.
MENU A
inn
ao fuu
2 Press the A/B button to select Menu B.
§8 an
3 Use the tuning control to select Menu No. 59.
MENU
59 are ]
4 Select ON using the UP or DOWN button.
54 an
MEM a |
5 Press the CLR or MENU button to exit the Menu
Set-up mode.
6 If you attempt to store data in any memory
channel, the Morse code "CHECK" alarm will
sound to remind you that memory protect is on. In
addition, you cannot clear any memory channel
using the CLR button.
35
MEMORY PROTECT 2
(OVERWRITE/DELETE INHIBIT)
Press the MENU button to enter the Menu Set-up
mode.
Press the A/B button to select Menu B.
so an |
Use the tuning control to select Menu No. 59.
Select OFF using the UP or DOWN button.
MENU
59 aE |
Use the tuning control to select Menu No. 60.
Select ON using the UP or DOWN button.
MENU 8 |
68 on i
Press the CLR or MENU button to exit the Menu
Set-up mode.
You can store data in an empty channei now, but
if you attempt to overwrite data in an occupied
memory channel, the Morse code "CHECK" alarm
will sound to remind you that memory protect is
on,
In addition, you cannot clear any memory channel
using the CLR button.