Kenwood TS-60S Instruction Manual page 13

SOMM, ALC MODE TRANECF IVER 15-65
ML M.SCR PRG SCAN
L9B USB CWA FMAM TONE
® MIC connector
Connect the microphone securely.
@ AF control
Adjusts the receiver audio volume.
SQL control
Threshold ar +» sar
Noise is heard. Noise disappears.
13
® RIT control
© Receiver frequency shift
® Scan speed change
(1) Receiver frequency shift
With the RIT on, the receiver frequency is
adjustable without affecting the transmitter
frequency.
Turn the RIT control clockwise, and
the frequency will shift up.
(2) Scan speed change
Using the RIT control, the scan speed can be
changed during memory or program scan.
Turn
the RIT control counterclockwise, and the scan
speed will increase. When exiting scan, center the
RIF control.
For details, refer to page 40.
Note:
Remember that the RIT control affects both the receiver
frequency shift, and scan speed. If you switch the AIT on after
using the scan, the receiver frequency may be shifted.
@® IF SHIFT control
Normally, set the control to the center (detent)
position.
For details, refer to "IF Shift" on page 43.
Note: The IF SHIFT conirol functions in the SSB and CW
modes, and does not function in the AM and FM modes.