Kenwood TS-60S Instruction Manual page 20

@ Meter
Appears as the Peak Hold S meter (S1 to 60 dB)
during reception, and as the Peak Hold RF meter (to
10) during transmission. The peak hold characteristic
can be disabled by menu selection if required.
The RF meter also can deflect times four (4X) when
low power is selected. For details, refer to "Menu
Set-up" (Menu A, No. 14 and Menu B, No. 55) on
pages 46 and 47.
@® BUSY
Appears when the squelch is opened, either by the
SQL control or by a received signal.
@® M/L
Appears when Medium or Low transmitter output
power is selected using the Menu Set-up. No
designator indicates full power.
® M.SCR/PRG/SCAN
Appears when the M.IN button is pressed to activate
the Memory SCRoll function. PRG appears after
selecting memory channel 99. PRG and SCAN both
appear during program scan. SCAN appears during
memory scan.
@ -N
Appears when an optional Narrow filter is selected
using the Menu Set-up. For details, refer to "IF Filter"
on page 43.
@ LSB/USB/CW/FM/AM
A modulation mode appears depending upon which
you select using the SSB/CW or FM/AM button.
@ TONE
Appears when either the burst, or continuous
subaudible TONE is on. Both the FM mode and
SPLIT transmit/receive operation must be selected to
use the tone encoder.
2 CONTROLS AND CONNECTORS
20